Teflon® Machined PTFE Parts         Call Toll Free 800-888-2605

 

Plastic Machining  Acetal Machined Parts  CPVC Machined Parts  Delrin Machined Parts  ETFE Machined Parts  ECTFE Machined Part  FEP Machined Part  Fluorosint Machined Parts  Halar Machined Part  Kel-F Machined Part  Kynar Machined Part  Macor Ceramic  Neoflon Machined Parts  Nylatron Machined Parts  Nylon Machined Parts  Nylon 6 Machined Parts  PCTFE Machined Parts  Peek Machined Parts  Polyamide-Imide Parts  Polyimide Parts  Polyurethane Molded Part  PPS Machined Part  PTFE Machined Parts  PVC Machined Parts  Rulon Machined Part  Ryton PPS Parts  Semitron Parts  Techtron Machined Parts  Teflon Machined Parts  Tefzel Machined Parts  Torlon Parts  Turcite Parts  UHMW Machined Parts  Ultem Parts  Vespel Machined Parts  Home  E-Mail  Map  Terms

TEFLON® PTFE MACHINED PARTS

M&P can make machined parts from PTFE Teflon® to your specification.

MATERIAL DESCRIPTION
PTFE stands for PolyTetraFluoroEthylene, it is a fluorocarbon-based polymer.  The Teflon® brand of PTFE is resin manufactured only by DuPont. Several other manufacturers make their own brands of PTFE which can often be used as substitute material.

PTFE's mechanical properties are low compared to other plastics, and can be used over a wide temperature range of -100°F to +400°F (-73°C to 204°C). Mechanical properties are often enhanced by adding fillers (see paragraph below). It has excellent thermal and electrical insulation properties and a low coefficient of friction.  PTFE is very dense and cannot be processed by melting.  PTFE must be compressed and sintered to form useful shapes.

PTFE's mechanical properties can be enhanced by adding fillers.  These fillers include glass fibers, carbon, graphite, molybdenum disulphide, and bronze. Generally, filled PTFE's maintain their excellent chemical and high temperature characteristics, while fillers improve mechanical strength, stability, and wear resistance.
Also, there are a lot of different plastics filled with PTFE.

CUSTOM MACHINED PARTS
Processing and machining of Teflon® parts take place in a completely controlled environment. We maintain a complete record of our products. Some type of parts from Teflon® we machine are:

Balls	Nozzles	Semiconductor Parts
Back Up Rings	Pads	Sheaves
Blocks	Parts	Spacers
Bushings	Plugs	Supports
Cams	Rings	Valve Seats
Caps	Rods	Washers
Guides	Rollers	Wear Pads
Medical Parts	Seals

M&P's state of the art facilities are always open for you to visit.
For a quote on your custom Teflon® parts click on the e-mail link or give us a call at 1-800-888-2605.

Teflon® is a registered trademark of E.I. du Pont de Nemours Company



 M&P Flange & Pipe Protection Inc.
 9426 Katy Fwy  Bldg #11
 Houston, TX 77055
 Phone: 800-888-2605   Fax: 713-463-6343              mailto:sales@m-p.com
 
Copyright © 2010