Semitron® Machined Parts         Call Toll Free 800-888-2605    Plastic Machining  Acetal Machined Parts  CPVC Machined Parts  Delrin Machined Parts  ETFE Machined Parts  ECTFE Machined Part  FEP Machined Part  Fluorosint Machined Parts  Halar Machined Part  Kel-F Machined Part  Macor Ceramic  Neoflon Machined Parts  Nylatron Machined Parts  Peek Machined Parts  Polyamide-Imide Parts  Polyimide Parts  Polyurethane Molded Part  PPS Machined Part  PTFE Machined Parts  PVC Machined Parts  Rulon Machined Part  Ryton PPS Parts  Semitron Parts  Techtron Machined Parts  Teflon Machined Parts  Tefzel Machined Parts  Torlon Parts  Turcite Parts  UHMW Machined Parts  Ultem Parts  Vespel Machined Parts  Home  E-Mail  Map  Terms SEMITRON® MACHINED PARTS M&P can make Semitron® Machined Parts to your specifications. MATERIAL DESCRIPTION Semitron® ESd is a family of static dissipative products.  Semitron Grades are designed for use where electrical discharge in operation is a problem. Semitron® ESd  grades are commonly used for sensitive electronic components including integrated circuits, hard disk drives, and circuit boards. Semitron® products are used for material handling applications and components in high speed electronic printing and reproducing equipment.  Semitron® ESd grades are inherently dissipative. They do not rely on humidity to activate.  Static electricity is dissipated through these products as readily as it is dissipated along the surface. GRADES OF SEMITRON SEMITRON® ESd 225 ●Semitron® ESd 225 is a static dissipative acetal. ●Semitron® ESd 225 material has the same general properties as unfilled acetal, but with static dissipative properties.  Its resistive range is 1010 to 1012. ●Semitron® ESd 225 can be used up to temperatures of 225°F without degradation. ●Semitron® ESd 225 has broad chemical resistance and good wear resistance.   SEMITRON® ESd 410C ●Semitron® ESd 410C is a static dissipative Polyetherimide (Ultem® ).  ● Semitron® ESd 410C material has the same general properties as unfilled Ultem, but with static dissipative properties.  Its resistive range is 104 to 106. ● Semitron® ESd 410C can be used up to temperatures of 410°F without degradation. ● Semitron® ESd 410C has low stress for tighter tolerances during machining.   SEMITRON® ESd 420 ● Semitron® ESd 420 is a static dissipative Polyetherimide. ● Semitron® ESd 420 material has the same general properties as PEI, but with static dissipative properties. Its resistive range is 106 to 109. ● Semitron® ESd 420 is thermally stable to temperatures of 420°F without degradation.   SEMITRON® ESd 500HR ● Semitron® ESd 500HR is a static dissipative reinforced PTFE (PolyTetraFluoroEthylene). ● Semitron® ESd 500HR material has the same general properties as unfilled PTFE, but with static dissipative properties.  Its resistive range is 1010 to 1012. ● Semitron® ESd 500HR is thermally stable to temperatures of 500°F without degradation. ● Semitron® ESd 500HR has a high thermal insulation and a low coefficient of friction.  SEMITRON® ESd 520HR ● Semitron® ESd 520HR is a static dissipative reinforced Polyamide-Imide (Torlon ®). ● Semitron® ESd 520HR material has the same general properties as Torlon ® 5530, but with static dissipative properties. Its resistive range of 1010 to 1012. ● Semitron® ESd 520HR is thermally stable to temperatures of 520°F without degradation. ● Semitron ® ESd 520HR has high structural strength and stiffness combined with excellent dimensional stability. ● Semitron® ESd 520HR is ideal for making nests, sockets and contactors for test equipment and other electronic device handling components. ● Semitron® ESd 520HR maintains its dielectric performance at high voltages (>100V), while maintaining its mechanical properties.  Most other carbon-fiber-enhanced products become irreversibly more conductive when exposed to moderate voltage. CUSTOM MACHINED PARTS Processing and machining of Semitron® parts take place in a completely controlled environment. We maintain a complete record of our products. We build excellence into every part we machine.  M&P's state of the art facilities are always open for you to visit. For a quote on your custom Semitron parts click on the email link provided or give us a call at 1-800-888-2605. Some type of Semitron® parts we machine are:   Balls Nozzels Semiconductor Parts Back Up Rings Pads Sheaves Blocks Parts Spacers Bushings Plugs Supports Cams Rings Valve Seats Caps Rods Washers Guides Rollers Wear Pads Medical Parts Seals                Semitron® is a registered trademark of Quadrant Engineering Plastic Products. Torlon® is a registered trademark of Solvay Advanced Polymers. Ultem® is a registered trademark of General Electric.   Machined Parts     Plastic Distribution     Flange Protection     Pipe Protection     Gaskets     Accessories       Terms     E-Mail     Map     Home    M&P Flange & Pipe Protection Inc.  9426 Old Katy Rd  Bldg #11  Houston, TX 77055  Phone: 800-888-2605   Fax: 713-463-6343        mailto:sales@m-p.com  Copyright © 2008