PPS Machined Parts         Call Toll Free 800-888-2605

Plastic Machining  Acetal Machined Parts  CPVC Machined Parts  Delrin Machined Parts  ETFE Machined Parts  ECTFE Machined Part  FEP Machined Part  Fluorosint Machined Parts  Halar Machined Part  Kel-F Machined Part  Kynar Machined Part  Macor Ceramic  Neoflon Machined Parts  Nylatron Machined Parts  Nylon Machined Parts  Nylon 6 Machined Parts  PCTFE Machined Parts  Peek Machined Parts  Polyamide-Imide Parts  Polyimide Parts  Polyurethane Molded Part  PPS Machined Part  PTFE Machined Parts  PVC Machined Parts  Rulon Machined Part  Ryton PPS Parts  Semitron Parts  Techtron Machined Parts  Teflon Machined Parts  Tefzel Machined Parts  Torlon Parts  Turcite Parts  UHMW Machined Parts  Ultem Parts  Vespel Machined Parts  Home  E-Mail  Map  Terms

PPS MACHINED PARTS

M&P can make custom PPS machined Parts to your specifications

MATERIAL DESCRIPTION
Polyphenylene Sulfide (PPS) offers the broadest resistance to chemicals of any advanced engineering plastic.   M&P makes custom machined PPS parts to your specifications.  They have no known solvents below 392°F and are inert to steam, strong bases, fuels and acids.  PPS is ideal for precise tolerance machined components, because it has minimal moisture absorption and a very low coefficient of linear thermal expansion.

NOTABLE MATERIAL FEATURES
• Minimal moisture absorption
• Very low coefficient of linear thermal expansion;

GRADES OF PPS
RYTON® 40% Glass Reinforced PPS
Ryton®, Glass filled PPS, is the most recognized filled grade of PPS.  Glass filled PPS has better dimensional stability and thermal performance than unfilled Techtron® PPS and maintains its strength to above 425°F.  Ryton® is a trade name of Chevron Phillips Chemical.

RYTON® Bearing Grade PPS
Ryton®, Bearing grade PPS, is internally lubricated and is carbon fiber filled, offering a low coefficient of thermal expansion and uncompromised chemical resistance.  Bearing grade Ryton® can be used for thrust or wear applications and when an electrical conductive material is required.

TECHTRON® PPS
Techtron® PPS is made by Quadrant DSM Engineering Plastic.  Unfilled Techtron® is easily machined to close tolerances.
Techtron® PPS can be used for structural applications in corrosive environments and as a lower-temperature replacement for PEEK®.
Standard Techtron® is off-white in color, but it is also available in black as a compression molded version.

 
TECHTRON® APPLICATIONS
• High pressure liquid chromatography components
• Wafer retaining rings for CMP polishing
• Hydrocarbon pump, valve, and compressor components
• Oilfield parts
• Aerospace components
• Medical and diagnostic device parts

CUSTOM MACHINED PARTS
Processing and machining of PPS parts take place in a completely controlled environment. We maintain a complete record of our products. We build excellence into every part we machine.  M&P's state of the art facilities are always open for you to visit. For a quote on your custom PPS parts click on the  e-mail link or give us a call at 1-800-888-2605

Some PPS parts we machine are:

Balls	Nozzels	Semiconductor Parts
Back Up Rings	Pads	Sheaves
Blocks	Parts	Spacers
Bushings	Plugs	Supports
Cams	Rings	Valve Seats
Caps	Rods	Washers
Guides	Rollers	Wear Pads
Medical Parts	Seals

TECHTRON is a registered trademark of Quadrant DSM Engineering Plastic Products.
RYTON is a registered trademark of Chevron Phillips Chemical Company.
PEEK is a registered trademark of Victrex


 
 M&P Flange & Pipe Protection Inc.
 9426 Katy Fwy  Bldg #11
 Houston, TX 77055
 Phone: 800-888-2605   Fax: 713-463-6343         sales@m-p.com

 Copyright® 2010