Nylon Machined Parts         Call Toll Free 800-888-2605

---

Plastic Machining  Acetal Machined Parts  CPVC Machined Parts  Delrin Machined Parts  ETFE Machined Parts  ECTFE Machined Part  FEP Machined Part  Fluorosint Machined Parts  Halar Machined Part  Kel-F Machined Part  Kynar Machined Part  Macor Ceramic  Neoflon Machined Parts  Nylatron Machined Parts  Nylon Machined Parts  Nylon 6 Machined Parts  PCTFE Machined Parts  Peek Machined Parts  Polyamide-Imide Parts  Polyimide Parts  Polyurethane Molded Part  PPS Machined Part  PTFE Machined Parts  PVC Machined Parts  Rulon Machined Part  Ryton PPS Parts  Semitron Parts  Techtron Machined Parts  Teflon Machined Parts  Tefzel Machined Parts  Torlon Parts  Turcite Parts  UHMW Machined Parts  Ultem Parts  Vespel Machined Parts  Home  E-Mail  Map  Terms

               

Nylon Machined Parts

M&P can make Custom Nylon Machined Parts to your Specifications.

MATERIAL DESCRIPTION
The exceptional bearing and wear properties of Nylon make it one of the most widely used plastics in the world. Nylon is frequently used as a replacement for bronze, brass, aluminum, steel and other metals, as well as other plastics, wood, and rubber.

NOTABLE MATERIAL FEATURES
 ● High tensile strength and modulus of elasticity
 ● High impact resistance, a high heat distortion temperature
 ● Resists wear, abrasion, and vibration
 ● Can withstand contact with chemicals, alkalies, dilute acids or oxidizing agents.
 ● Available Types: 6/6 (extruded), 6 (cast)
 ● Available in Natural, Black, MD, Glass-Filled, Oil-Filled & various other compounds.
 ● Nylon® is NOT moisture Resistant.

GRADES OF EXTRUDED NYLON
Nylon 101 - Extruded Nylon 6/6
Nylon 101 is an extruded form of polyamide, offering rigidity, strength, wear resistance, and heat resistance to 210°F. It is commonly used in both structural and general-purpose bearing and wear applications. This material is available in natural and black. The natural material is compliant with FDA, USDA, NST, and 3A-Dairy regulations.

Nylatron® GS – Extruded Nylon 6/6, MoS2 filled
Nylatron GS Nylon is a nylon and molybdenum disulphide (MoS2) composition designed to improve the mechanical, thermal and bearing properties of type 6/6 nylon while maintaining its basic electrical and chemical characteristics. Through compounding, finely divided particles impart extra lubricity to this nylon, permitting Nylatron GS parts to operate with little or no lubrication. The added lubricity also contributes dramatically to component service life, making Nylatron GS a very cost-efficient choice. Nylatron GS offers greater wear resistance, lower surface friction, higher strength and greater rigidity than unfilled 6/6 with improved dimensional stability.

30% Glass-Reinforced Extruded Nylon 6/6
30% glass reinforced nylon 6/6 is also available for applications requiring higher compressive strength and rigidity, and improved frictional characteristics

GRADES OF CAST NYLON
MC®907 & MC®901 - Cast Unfilled Nylon 6
Unfilled cast type 6 nylon offers the highest strength and hardness of the nylon 6 grades.
MC907 is the natural grade (off-white in color), is FDA, USDA and 3A-Dairy compliant and is primarily used for food contact parts.
MC901 is the heat-stabilized grade, (Blue in color) offers thermal stability to 260°F, and is used in bearing and structural applications.

Nylatron® GSM - Cast MOS2-Filled Nylon 6
Nylatron GSM cast nylon contains finely divided particles of molybdenum disulfide to enhance its load bearing capabilities while maintaining the impact resistance inherent to nylon. It is the most commonly used grade for gears, sheaves, sprockets and custom parts. It is gray-black in color.

Nyloil® - Cast Oil-Filled Nylon 6
This is cast nylon with built-in oil lubrication.  Standard grade is Green in color, but a natural (off-white) colored FDA & USDA approved grade is also available.

Nylatron® GSM Blue - Cast MOS2- & Oil-Filled Nylon 6
Nylatron GSM Blue nylon is the first cast nylon to combine both molybdenum disulfide and oil for the load capability of Nylatron GSM nylon, plus improved frictional characteristics. It excels in higher pressures, and at low speeds- up to 40 fpm. It offer 20% lower coefficient of friction, 50% greater limiting PV, and a lower "k" factor than Nylatron GSM, and the lowest "slip-stick" of any nylon product. It is ideal for slide pads, thrust washers and trunion bearings. Nylatron GSM blue should be considered for any oil-filled nylon application. It is dark blue in color.

Nylatron® NSM - Cast Solid-Lubricant-Filled Nylon 6
Nylatron NSM is the premium bearing and wear nylon product available today. Solid lubricant additives impart self-lubricating, high pressure/velocity and superior wear resistance characteristics. This wear resistance is delivered without either start-up or running lubrication making it ideal for bearings, gears and wear pads. It is a proprietary type 6 nylon formulation produced using Quadrant EPP's MONOCAST process. Nylatron NSM was developed specifically for demanding applications where larger size parts are required. In wear applications, Nylatron NSM lasts up to 10 times longer than standard Type 6 nylon.

CUSTOM MACHINED PARTS
Processing and machining of Nylon parts take place in a completely controlled environment. We maintain a complete record of our products. We build excellence into every part we machine.  M&P's state of the art facilities are always open for you to visit.
For a quote on your custom Nylon parts click on the e-mail link or give us a call at 1-800-888-2605

Some of the nylon machined parts we do are:

 

Balls	Nozzels	Semiconductor Parts
Back Up Rings	Pads	Sheaves
Blocks	Parts	Spacers
Bushings	Plugs	Supports
Cams	Rings	Valve Seats
Caps	Rods	Washers
Guides	Rollers	Wear Pads
Medical Parts	Seals

 M&P Flange & Pipe Protection Inc.
 9426 Katy Fwy Bldg #11
 Houston, TX 77055
 Phone: 800-888-2605   Fax: 713-463-6343        sales@m-p.com

Copyright © 20010