Nylon 6 Machined Parts Call
Toll Free
800-888-2605
NYLON 6 MACHINED PARTS
M&P can make Nylon 6 Machined Parts to your specifications.
MATERIAL DESCRIPTION
The exceptional bearing and wear properties of Nylon® make it one of the most widely used plastics in the world. Nylon® is frequently used as a replacement for bronze, brass, aluminum, steel and other metals, as well as other plastics, wood, and rubber.
NOTABLE MATERIAL FEATURES
● High tensile strength and modulus of elasticity
● High impact resistance, a high heat distortion temperature
● Resists wear, abrasion, and vibration
● Can withstand contact with chemicals, alkalies, dilute acids or oxidizing agents.
● Available in Natural, Black, MD, Glass-Filled, Oil-Filled & various other compounds.
● Nylon® is NOT moisture Resistant.
GRADES OF CAST NYLON 6
MC® 907 & MC® 901 - Cast Unfilled Nylon 6
● Unfilled cast type 6 nylon offers the highest strength and hardness of the nylon 6 grades.
● MC907 is the natural grade (off-white in color), is FDA, USDA and 3A-Dairy compliant and is primarily used for food contact parts.
● MC901 is the heat-stabilized grade, (Blue in color) offers thermal stability to 260°F, and is used in bearing and structural applications.
Nylatron® GSM - Cast MOS2-Filled Nylon 6
Nylatron GSM cast nylon contains finely divided particles of molybdenum disulfide to enhance its load bearing capabilities while maintaining the impact resistance inherent to nylon. It is the most commonly used grade for gears, sheaves, sprockets and custom parts. It is gray-black in color.
Nyloil® - Cast Oil-Filled Nylon 6
This is cast nylon with built-in oil lubrication. Standard grade is Green in color, but a natural (off-white) colored FDA & USDA approved grade is also available.
Nylatron® GSM Blue - Cast MOS2- & Oil-Filled Nylon 6
Nylatron GSM Blue nylon is the first cast nylon to combine both molybdenum disulfide and oil for the load capability of Nylatron GSM nylon, plus improved frictional characteristics. It excels in higher pressures, and at low speeds- up to 40 fpm. It offer 20% lower coefficient of friction, 50% greater limiting PV, and a lower "k" factor than Nylatron GSM, and the lowest "slip-stick" of any nylon product. It is ideal for slide pads, thrust washers and trunion bearings. Nylatron GSM blue should be considered for any oil-filled nylon application. It is dark blue in color.
Nylatron® NSM - Cast Solid-Lubricant-Filled Nylon 6
Nylatron NSM is the premium bearing and wear nylon product available today. Solid lubricant additives impart self-lubricating, high pressure/velocity and superior wear resistance characteristics. This wear resistance is delivered without either start-up or running lubrication making it ideal for bearings, gears and wear pads. It is a proprietary type 6 nylon formulation produced using Quadrant EPP's MONOCAST process. Nylatron NSM was developed specifically for demanding applications where larger size parts are required. In wear applications, Nylatron NSM lasts up to 10 times longer than standard Type 6 nylon.
CUSTOM MACHINED PARTS
Processing and machining of Nylon 6 parts take place in a completely controlled environment. We maintain a complete record of our products. We build excellence into every part we machine. M&P's state of the art facilities are always open for you to visit. For a quote on your custom Nylon 6 parts click on the email link provided or give us a call at 1-800-888-2605
Some of the machined parts we do are:
| Balls | Nozzels | Semiconductor Parts |
| Back Up Rings | Pads | Sheaves |
| Blocks | Parts | Spacers |
| Bushings | Plugs | Supports |
| Cams | Rings | Valve Seats |
| Caps | Rods | Washers |
| Guides | Rollers | Wear Pads |
| Medical Parts | Seals | |
Gaskets Accessories Terms E-Mail Map Home
M&P Flange & Pipe Protection Inc.
9426 Old Katy Rd Bldg #11
Houston, TX 77055
Phone: 800-888-2605 Fax: 713-463-6343 mailto:sales@m-p.com
Copyright © 2008
