● High tensile strength and modulus of elasticity
● High impact resistance, a high heat distortion temperature
● Resists wear, abrasion, and vibration
● Can withstand contact with chemicals, alkalies, dilute acids or oxidizing agents.
● Available Types: 6/6 (extruded), 6 (cast)
● Available in Natural, Black, MD, Glass-Filled, Oil-Filled & various other compounds.
● Nylon® is NOT moisture Resistant.
GRADES OF NYLATRON
Nylatron® GSM - Cast MOS2-Filled Nylon 6
Nylatron GSM cast nylon contains finely divided particles of molybdenum disulfide to enhance its load bearing capabilities while maintaining the impact resistance inherent to nylon. It is the most commonly used grade for gears, sheaves, sprockets and custom parts. It is gray-black in color.
Nylatron® GSM Blue - Cast MOS2- & Oil-Filled Nylon 6
Nylatron GSM Blue nylon is the first cast nylon to combine both molybdenum disulfide and oil for the load capability of Nylatron GSM nylon, plus improved frictional characteristics. It excels in higher pressures, and at low speeds- up to 40 fpm. It offer 20% lower coefficient of friction, 50% greater limiting PV, and a lower "k" factor than Nylatron GSM, and the lowest "slip-stick" of any nylon product. It is ideal for slide pads, thrust washers and trunion bearings. Nylatron GSM blue should be considered for any oil-filled nylon application. It is dark blue in color.
Nylatron® GS – ExtrudedNylon 6/6, MoS2 filled
Nylatron GS Nylon is a nylon and molybdenum disulphide (MoS2) composition designed to improve the mechanical, thermal and bearing properties of type 6/6 nylon while maintaining its basic electrical and chemical characteristics. Through compounding, finely divided particles impart extra lubricity to this nylon, permitting Nylatron GS parts to operate with little or no lubrication. The added lubricity also contributes dramatically to component service life, making Nylatron GS a very cost-efficient choice. Nylatron GS offers greater wear resistance, lower surface friction, higher strength and greater rigidity than unfilled 6/6 with improved dimensional stability.
30% Glass-Reinforced Extruded Nylon 6/6
30% glass reinforced nylon 6/6 is also available for applications requiring higher compressive strength and rigidity, and improved frictional characteristics.
Nylatron®NSM - Cast Solid-Lubricant-Filled Nylon 6
Nylatron NSM is the premium bearing and wear nylon product available today. Solid lubricant additives impart self-lubricating, high pressure/velocity and superior wear resistance characteristics. This wear resistance is delivered without either start-up or running lubrication making it ideal for bearings, gears and wear pads. It is a proprietary type 6 nylon formulation produced using Quadrant EPP's MONOCAST process. Nylatron NSM was developed specifically for demanding applications where larger size parts are required. In wear applications, Nylatron NSM lasts up to 10 times longer than standard Type 6 nylon.
CUSTOM MACHINED PARTS
Processing and machining of Nylatron parts take place in a completely controlled environment. We maintain a complete record of our products. We build excellence into every part we machine. M&P's state of the art facilities are always open for you to visit. For a quote on your custom Nylatron parts click on the email link provided or give us a call at 1-800-888-2605.
Some type of parts we produce are:
| Balls | Nozzels | Semiconductor Parts |
| Back Up Rings | Pads | Sheaves |
| Blocks | Parts | Spacers |
| Bushings | Plugs | Supports |
| Cams | Rings | Valve Seats |
| Caps | Rods | Washers |
| Guides | Rollers | Wear Pads |
| Medical Parts | Seals | |
Nylatron rod Nylatron slab
Nylatron tube
Nylatron machining
Nylatron - Cast-Nylon
Nylatron GS
Nylatron GSM
Nylatron NSM
Call us today at 1-800-888-2605 or e-mail us at sales@m-p.com.
® Registered Trademark of Quadrant For Nylatron
Machined Parts Plastic Distribution Flange Protection Pipe Protection Gaskets
Accessories Terms E-Mail Map Home
M&P Flange & Pipe Protection Inc.
9426 Old Katy Rd Bldg #11
Houston, TX 77055
Phone: 800-888-2605 Fax: 713-463-6343
Copyright® 2008
